JINPAT presents the Rotary Joint Integrated Electrical Slip Ring, a state-of-the-art solution designed to streamline the transmission of gas, liquid, and electrical power. This innovative integration meets the diverse needs of modern application equipment, providing a single, efficient interface for multiple media types.
Description:
A pneumatic slip ring is a mechanism used to transfer fluid (under pressure or vacuum) from a stationary inlet to a rotating outlet, preserving and isolating the fluid connection.
Pneumatic slip rings are engineered to endure a wide range of temperatures and pressures for a variety of conditions and environments. In addition, rotary unions may integrate multiple passages and handle different types of fluid simultaneously.
| Rotary Unions & Joints Spec | Specifications | ||||
| Max.operating Pressure | 6bar | Fiber types |
SM:9/125um |
Storage temperature |
-55~+85°C |
| Medium Type |
Air | Channel number | 1 |
Maximum speed |
10rpm |
|
Passages(Gas/Flow) |
2 in 2out | Wavelengthrange |
SM:1270-1650nm |
Package style |
Pigtails on both ends |
| Insertion loss |
＜2dB |
Weight,approx |
10g(No tail cable and connection included ) | ||
| Outer diameter of tube | φ12mm |
Insertion lossripple |
＜0.5dB |
Jacket types |
3mm(TPU) |
|
Return loss |
≥40dB(SM) |
Connector types |
SC/PC | ||
| No-load torque | ≤8.0N.m |
Max Optical Power |
23dBm | IP rating | IP40 |
|
Working temperature |
:-45~+80°C | ||||
| Electrical&Electronics | Mechanical | |||
| Circuits | total | 93CKT | Working Speed |
0~10 rpm |
| Detail | 12x10A/9x5A8xGMS GND/49S/1 Group*100Mbit Ethernet | Inner Diameter |
/ | |
| Rating Voltage |
220VAC(P)/24VDC(S) | Contact Material |
Precious Metal | |
|
Dielectric Stength |
500VAC@50Hz(P) 100VAC@50Hz(S) |
Housing Material |
Aluminum Alloy | |
| Insulation Resistance |
≥500MΩ@500VDC(P) ≥100MΩ@100VDC(S) |
Lead Wire Length |
Stator:2000mm Rotor:2000mm |
|
|
Environment |
Remarks |
|||
| Working Temperature |
-20°C~+60°C | Application |
/ | |
| Working Humidity |
≤60%RH | Other |
/ | |
| IP | IP40 | Note:"P"stands for power ,"S"stands for signal | ||